Introduction to Construction Waste Disposal Plan

2023-02-28
Lee
Lee
Contact

The world produces tens of billions of tons of construction waste every year and grows at a rapid rate. These garbage resources that could have been recycled were randomly landfilled and stacked, which not only encroached on the limited land resources, but also damaged the balance of the ecological environment, and even endangered human life and health. We must take effective measures to mitigate the harm of construction waste to the environment and human beings.

GEP Ecotech’construction waste disposal system fully recycles the usable materials in construction waste through a series of processes such as mechanical separation, crushing, soil removal, iron removal, air separation, flotation, etc., reducing pollution, improving resource utilization, and creating economic value.

The disposal system has two modes: fixed and mobile. The fixed type has a complete production system, which can produce continuously, facilitate comprehensive management and effectively control production costs; The mobile type is very suitable for small and medium-sized production demand and the environment of frequent mobile operation. It is flexible, easy to transfer, without capital construction, and economical and practical. We can configure reasonable and effective disposal plans according to customer needs.

1、 Fixed disposal plan

The material is sent to the jaw crusher through the feeder for coarse crushing, and then through magnetic separation, manual sorting and primary air separation after crushing. The relatively clean material is sent to the counter crushing for medium and fine crushing. After crushing, it is sent to the finished product screen for screening, and the unqualified material is returned to the counter crushing and broken again until it is qualified. The material after the finished product screening is sent to the light material processor for impurity removal and then transported to the material pile. 

The program uses the mature jaw crusher and impact crusher as the core equipment, with strong crushing capacity, high crushing efficiency, large processing capacity, excellent grain size of finished sand and gravel, and reasonable grading.

Construction Waste Crushing Project

2、 Mobile disposal plan

The construction waste is fed to the feeder by the forklift. The feeder has the pre-screening function. The fine materials that do not need to be crushed are conveyed to the material pile by the belt conveyor. The large materials are conveyed to the crusher by the feeder for crushing. The crushed materials are conveyed to the finished product screen by the belt conveyor for screening. The iron remover removes the reinforcement. The air separator and the water flotation separator remove the light materials respectively, and finally different specifications of clean aggregate are obtained.

In this scheme, all waste treatment equipment can be installed on the mobile frame, with short project cycle and fast transfer follow-up, which can treat construction waste nearby and reduce the high cost of waste transportation.

Welcome to buy GEP Ecotech construction waste disposal system to contribute to the construction of a waste-free city!

Request Information

Send your inquiry for further information.