Nowadays, with the rapid development of society, we will produce a lot of domestic waste in our life. When we recycle these domestic waste, it is a big project. At this time, we need the domestic waste shredder. When the domestic waste shredder is used for a long time or the quality of the equipment is not so good, it needs more maintenance. As a manufacturer of solid waste crusher, GEP ECOTECH will tell you about the maintenance precautions of the domestic waste shredder, which will also extend the service life of the machine.
Although the domestic waste shredder is a very "solid" equipment, it still needs more maintenance in daily life. Improper use of the domestic waste crusher will also cause damage to the equipment, affect the operation rate, and cause certain economic losses. So what are the maintenance precautions of domestic waste crusher?
Before testing and starting, the equipment should strictly and carefully check whether the installation of each part of the machine meets the requirements, and whether the screws and bolts are loose. You can gently pull the belt by hand to test run, and check whether there is any phenomenon such as touching the shell. At the same time, check the direction of rotation. It is strictly forbidden to crush inflammable and explosive materials to avoid accidents.
During the operation, it should keep the uniform blanking to ensure the quality of crushing and normal production. At the same time, it should strictly prohibit the motor overload to ensure the normal operation of the domestic waste shredder. In addition to regular inspection, pay attention to the loose fastening of all parts of the equipment, at the same time, pay more attention to the wear of easily damaged parts. If the wear is serious, it should be replaced in time to avoid damaging the main parts, and take fire prevention measures.
Due to the high rotating speed of the equipment, in addition to the correct and firm installation, good lubrication should be maintained to ensure the normal operation of the domestic waste crusher. The normal temperature of bearing is no more than 70 ℃. Main shaft once a week to add butter, molybdenum disulfide, high-speed butter effect is better.
