Common Faults and Troubleshooting Methods of Double-Shaft Shredder

2023-06-18
Lee
Lee
Contact

1、 Double-shaft shredder not working

1) The power supply voltage is too high or too low → Check whether the voltage is normal.

2) Broken wire, connector and terminal detachment → Repair broken wire, tighten terminal.

3) The main power supply is not connected → Check if the main power supply is connected.

4) Thermal relay disconnected due to overload → Reset thermal relay.

5) Fuse blown → Replace fuse. 

2、 Excessive tool wear

1) The material contains a lot of hard objects → Install auxiliary equipment to remove hard objects.

2) Poor tool material → Use original factory tools or replace with high-quality tools. 

Double-shaft shredder

3、 Abnormal sound emitted

1) Check if metal has been mistakenly added to the feed hopper → Stop the machine and remove the metal.

2) Check if the bearings are damaged → Stop the machine and replace the bearings.

3) Moving knife touches fixed knife plate → Adjust the distance between moving knife and fixed knife plate.

4) A certain component is loose → Check and tighten the loose component.

4、 Double-shaft shredder shutdown

Equipment overload shutdown → Clear the materials inside the equipment, manually reverse start, and then forward start.

As a manufacturer of double-shaft shredders, you can consult us for any questions related to the double-shaft shredder, and we will enthusiastically answer them for you.

Request Information

Send your inquiry for further information.