This article is compiled based on an exclusive interview with Wang Gong, and the content is derived from his personal experience. It only optimizes the logical expression and does not fabricate any key information.
I am Mr. Wang, the production director responsible for the project. We are an A-share listed company with an annual revenue of over 5 billion yuan, making us a leading enterprise in the environmental protection industry. Today, I would like to talk about our collaboration experience with GEP ECOTECH from the perspective of a frontline production manager.
The location of this project is concentrated in the clothing and footwear industry, which has long generated a large amount of shoe and clothing scraps. The pressure of solid waste disposal is prominent, and it has always been a key focus of environmental supervision. To open up the path of solid waste resource utilization, we have launched the industrial solid waste co incineration project, which shreds this type of waste and mixes it with sludge to be sent to the boiler for incineration, achieving harmless disposal.

In the early stage of project selection, we consulted with many equipment manufacturers, but most of the solutions were difficult to implement, either due to a lack of practical experience in similar projects or a lack of large-scale equipment manufacturing capabilities. Shredding is the "throat" of the entire project. Once the equipment runs unstable and material supply is interrupted, it will directly disrupt the boiler combustion conditions, which is the most concerning risk point in our production. Prior to this, we had also attempted to directly feed waste into the boiler, but the leather and shoe clothing scraps had strong toughness and messy shapes. The boiler feed inlet was frequently blocked, and the production line was constantly on and off, making continuous production impossible to guarantee. In addition, substandard discharge size, short tool life, and high maintenance costs are all real pain points facing us. So our core demands for selection are very clear: reliable equipment operation, timely after-sales response, and the ability to withstand the continuous testing of complex materials.
When we were at a loss, someone recommended GEP ECOTECH to us. After multiple comparisons, the complete shredding solution provided by GEP ECOTECH is more suitable for our working conditions and has rich experience in large-scale projects. For the production end, our core considerations are always operational stability and comprehensive operating costs - equipment cannot be shut down frequently, and maintenance costs cannot get out of control.
During the trial operation of the project, we encountered a problem that exceeded our initial estimation: there was a significant difference between the actual materials received on site and the materials communicated during the contract signing. The proportion of shoe scraps in the materials received was high, and the materials had strong toughness and were difficult to break, making disposal much more challenging than expected. The original blade configuration is difficult to adapt to, and if not handled properly, production capacity and discharge particle size will be affected. What impressed me the most was the response speed of the GEP ECOTECH team. The technical personnel followed up on the on-site working conditions in a timely manner, customized the tool structure based on the actual materials, and optimized the shredding plan accordingly. This enabled the stubborn leather scraps of shoes and clothing to be shredded smoothly, resolving production risks.

Let's talk about device configuration again. We have chosen a high-power double-shaft shredder, and the increase in motor power brings higher operational stability and efficiency; The hydraulic cylinder slide rail design allows for direct pulling out of the tool box, making it much easier for later maintenance. This is a practical design for equipment maintenance and upkeep; Because the leather and wool products being disposed of are relatively dry and may produce sparks due to breakage and friction, a flame detector, sound and light alarm, and sprinkler fire extinguishing system are equipped. When the detector detects a flame, it will sound and light an alarm, and at the same time, the sprinkler pipe will inject water into the shredder to extinguish the fire, which makes us feel much more at ease in production.

Since its launch, the entire production line has been running steadily and the production capacity continues to meet the standards; The discharge particle size fully meets the boiler incineration standards, with an overall efficiency increase of about 40%, and the boiler operating conditions remain stable.
As a production director, what I value most is that the equipment "does not fall off the chain" and the after-sales "can find people", both of which GEP ECOTECH has achieved.



